[s-cars] MTM software GP - If you are confused read this

[Mike Platt]

I just upgraded to the MTM stage 1+ from the TAP
setup. The TAP setup had the stock 2.5 bar sensor with
2 chips and stiffer wastegate spring. I pulled 17 psi
max.
With the MTM stage 1+ chipset and 3 bar sensor, I pull
22psi almost instantly.

Make no mistake. The difference is HUGE. My wife is
scared to mash the throttle now as it's like liftoff
compared to the TAP setup.

The TAP setup still makes more power than stock but
for the same price. The choice is MTM.


Mike P.
95.5 S6 avant
75 Carrera Targa

Does anybody know what max boost pressure you will get
with this setup.
IA
told me with a stage III+ (2.5 bar transducer) you
will get 22# max,
and
this is about all you can extract from the K24 turbo
(maybe safely
extract??). This is on my 200. Just curious cause this
GP states 3 bar
transducer.

Gary
94 UrS4 Wetterauer chip (21# boost, right Bob)
91 200 TQA IA III+ (1.8 bar or 22#)

> The upgrade is for the S4/S6 20V cars.
>
> It is the Stage 1+ upgrade that provides a claimed
280
> HP.
>
> It includesw the 3 bar transducer.


__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com