[s-cars] Removal of Seat Memory Control Unit?

[UrS492 at aol.com]

--
[ Picked text/plain from multipart/alternative ]
In a message dated 6/18/02 7:08:36 AM Mountain Daylight Time,
henryb at tsainc.com writes:
Brent,

       Mine started to go out on me,  When I took my seat apart for the new
Heat element, I noticed that one of the clips for the wires under the seat
had come loose.  I plugged it in again and mine works fine.  I would check
the connections under the seat first before removing the switch.

Mark
92 S4

> [ Picked text/plain from multipart/alternative ]
> Does anybody know if you have to remove the driver door inner-panel to
> remove the Seat Memory Control Unit?  Is there a detailed procedure
> written up for this one on a web page somewhere... if so, let me know.
>
> After the nth coffee spill in my wife's '95 A6, the panel stopped
> functioning... I was hoping that I could remove the unit and take it apart
> and clean it out and possibly getting it working again?  If it was an easy
> removal job, I could also swap out the one in my S4 to ensure that it
> isn't something else in the system that has failed?  Note:  The levers on
> the side of the drivers-seat that control the seat position both still
> work (so it's probably the control unit?).
>
>