[s-cars] Brake Pad Warning Light gone for good

[UrS492 at aol.com]

--
[ Picked text/plain from multipart/alternative ]
Fellow S-ers,

       Today I finally succeeded in getting the Brake Pad Warning Light shut
off.  Here is how I did it.  Took the female end of the connector (the one
with the rubber boot on it) Rolled up the boot to expose the two wires.
Clipped them near the connector, Soldered the two together, then replaced the
boot onto the connector to house the clipped wires.  Connected it back to the
male end of the connector so I don't have the wires floating around down
there.  Turned the key and got the "OK" from the display.  Much happier now.
   Someone wanted me to send this out once I completed it.  Hopefully this
will help others with the same issue.

Mark W.