[s-cars] FPRs & squirts

[Frank Amoroso]

My understanding is that patterns are stable down to 2.0 Bar. That being
said though, there is something about running higher pressures (rather than
lower) and better fuel atomization that will better serve my needs. That
being said, the RS2 injectors will be far too large for my purposes, think
of what they will be flowing when you add manifold pressure on top of the
FPR's rating!!

Anyone know for a fact how many spray holes the 3B injector has? My records
show 3 (like the AAN?), but I have never physically inspected one.

Frank--

 -----Original Message-----
From: 	Kirby Smith [mailto:kirby.a.smith at verizon.net]
Sent:	Tuesday, May 14, 2002 9:42 PM
To:	Frank Amoroso
Cc:	's-car-list at audifans.com'
Subject:	Re: [s-cars] FPRs & squirts

Is the spray pattern the same for an ADU at 3 bar vs. an AAN at 5 bar?
Looks like the ADU would provide the best headroom, but maybe idle
control would be difficult.

kirby



***********************************************************************************
This message contains information from Silicon Valley Bank which may be confidential and privileged.  If you are not an intended recipient, please refrain from any disclosure, copying, distribution or use of this information and note that such actions are prohibited.  If you have received this transmission in error, please notify the sender immediately by telephone or by replying to this transmission.
***********************************************************************************