[s-cars] re: da bose removal

[Bill Mahoney]

Chris,
Two thin 3/8" +/- long slots, one on each side along the bottom of the
radio.  Impossible to see really unless you look.
Fabricate w/dremel out of  an old hack saw blade a piece about <3/8"
wide x 2 or 3" long.  Cut a 45 degree angle on one end.  Insert that end
in one slot & pull out radio on that side using the cassette slot as
something to pull on.  I believe the 45 degeree angle faces towards the
side of the radio you are trying to remove.
It should easily remove.
HTH
Bill M  -someday hoping to think metric.