[s-cars] let's say you had cranked down the wategate

[tblack]

Go to your local hardware store and buy one wood bolt with the round head
that will fit the hole in the top of the wastegate; do the measurement
before you go. Cut the head off as close to the head as possible and install
with a little epoxy. Mine has been in place for several years with a 6 turn
adjustment to the allen bolt and no problems. It looks OEM as well.
HTH.
Tom Black.
----- Original Message -----
From: "otw185" <otw185 at yahoo.com>
To: <S-CAR-List at audifans.com>
Sent: Tuesday, November 12, 2002 9:13 AM
Subject: RE: [s-cars] let's say you had cranked down the wategate


> Is there a part number for that cap?  I've tried mine
> in different places after MTM recommends 6 turns in.
> Too lerchy at 6.  I think I have it where I like it
> (3) and would like to replace the cap covering that
> dried up, chipped out loctite.
>
> __________________________________________________
> Do you Yahoo!?
> U2 on LAUNCH - Exclusive greatest hits videos
> http://launch.yahoo.com/u2
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list