Removing O2 sensor....RE: [s-cars] Re: hesitation when cold

[S4audinut at aol.com]

--
[ Picked text/plain from multipart/alternative ]
In a message dated 11/16/2002 4:37:57 AM Eastern Standard Time, QSHIPQ
writes:


> Proceed with caution on this advice Rod.  If you get the oem bosch O2 sensor
> for the urs4/6 (Bosch 13019), it should come with a protective plastic cap
> and a tiny dab of A/S already on the threads.  The reason for this is that
> if ANY A/S gets onto the probe, bye bye O2.  I also advise that one be very
> careful in the insert procedure of the 02, it's really not that hard to
> scrape the probe against the threads when putting the 02 in.  Also, when
> removing the plastic cap, make sure the land with the A/S on it doesn't
> touch the probe, btdt.  If it does, use a rag with some silicone fee brake
> cleaner on it to wipe off the A/S.
>
> Also, make sure the A/S is NOT on the washer land area, it's not meant to
> be, and can affect 02 output.
>
> HTH
>
>

Fully agree.
Rod