[s-cars] Anyone ever use 944 Turbo calipers on an S6?

[S4audinut at aol.com]

--
[ Picked text/plain from multipart/alternative ]
In a message dated 11/16/2002 9:01:28 AM Eastern Standard Time,
joeamund at online.no writes:

> Hi again Richard!
> I am using an aluminium hat up front with the Porsche  rotors(GT2 330x36mm)
> and the Audi 112x5 bolt circle on the hats.
>
> On the rear I am using the one-piece cast GT3 rotor(322x28mm) with 130x5
> Porsche pattern redrilled to fit the 112x5 pattern and a centering ring. Se
> the setup at : http://www.s-cars.org/urs4s6/faq/f008/f008.html
> (there are still some pics and drawings missing from the article)
>
> So I am using all Audi hubs, if not I would have problems with new
> wheels.....
>
> Yes the shimming of the pads are extremely important, and is often
> forgotten
> when modifications are made by us.
>
> Regards Joern
>
>

I talked to Stoptech, and they have a set of 1 piston cable actuated
calipers(model ST10)  which will work with the right brackets (would have to
make) w/Big Red/SQ, or rs2 rear rotors/brake sets. 365$ each side so they
said. Any interest in doing something with these?
Rod