[s-cars] Bleeding Clutch Master Cylinder

[CLAG500 at aol.com]

Dan,

  The procedure shown in the Bentley says to connect a pressure bleeder (that
has brake fluid in it) to the bleeder screw on the clutch slave at the trans
and force the air out through the brake fluid reservior. I have flushed my
clutch system with my power bleeder attached to the brake fluid reservoir by
just opening the bleed screw on the clutch and moving the pedal up and down
(while holding it so it doesn't go to the floor) until the fluid looks clean.
I don't know if this would work on the new MC though. I have always read that
it has to be reverse bled through the slave bleeder.

Chad Tobin