[s-cars] Bolts to studs

[Robert Pastore]

Taka:
I happen to have one stud/nut here on my desk.  It's approx. 2.5" long, And
looks like it would protruded from the hub about 1 7/8".   The (14x
1.5mm)ball seat nuts are available from H&R too, and are part of the 2b kit.
BOB
-----Original Message-----
From: t44tq at mindspring.com [mailto:t44tq at mindspring.com]
Sent: Thursday, October 31, 2002 10:09 AM
To: 'Robert Pastore'; jolly at zoomtown.com; s-car-list at audifans.com
Subject: RE: [s-cars] Bolts to studs


Bob, I know you're busy, so I'll ask the general list as well-
what is the stud kit that people have bought for their cars?

H&R makes three different lengths and I want to get the correct
length.

Also, whose lug nuts do you use? Porsche or ???

Taka

-----Original Message-----
From: s-car-list-admin at audifans.com
[mailto:s-car-list-admin at audifans.com] On Behalf Of Robert Pastore
Sent: Thursday, October 31, 2002 8:40 AM
To: 'jolly at zoomtown.com'; s-car-list at audifans.com
Subject: RE: [s-cars] Bolts to studs


H&R makes screw-in studs that have a 5 mm hex cut into the outside end
of
the stud.   Apply some locktight, torque to 40 ft-lbs with a hex socket,
and
you are done. These should be available at any H&R dealer; I got my both
of my sets from 2bennett.

Bob

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.408 / Virus Database: 230 - Release Date: 10/24/02