[s-cars] RS2CQR Project Update

[QSHIPQ at aol.com]

--
[ Picked text/plain from multipart/alternative ]
Congrats Jimmy....

WRT "issues"....  I'd suggest ditching the serpentine, not sure how you can
do that without majorly modding the front end.  Take the original pulley from
the urq and bolt it to the cam gear of the AAN.  Then use the urq stuff.
IMS, you will have a problem with the alt bracket/WP interference running the
alt on the DS.  A bit of grinding and it should work.

WRT the rear water neck...  Somewhere I had found a metal replacement for the
plastic one on the AAN.  I'll see if I can dig that up.

Forget using the front motor mount from the AAN unless you plan on making a
lower tie bar ala RS2/S4.  BTW, Keith Anderson mounted the RS2 IC in the
stock location with some minor cuttting to the lower front valence.

HTH

SJ
In a message dated 9/27/02 10:10:44 AM Central Daylight Time,
Jimmy at texasbankers.com writes:


http://www.urs4.com/logbook/RS2CQ/photos/photos.htm