[s-cars] RE: Intake Air Temp Code

[Bruce Mendel]

On a similar note, does anyone know how to get the reading from the intake
temp sensor to show up in the car?

Bob Pastore mentioned at one time there was some double-secret password you
could enter in the HVAC system and the readout would appear. I am getting
close to putting water injection in and would love to see a before and after
using the sensor that's already in place.

Thanks.

Bruce
----- Original Message -----
From: "Tom Mullane" <tmullane at snet.net>
To: <s-car-list at audifans.com>; <200q20v at audifans.com>
Cc: <NDoshi at aol.com>
Sent: Monday, September 30, 2002 8:54 PM
Subject: [s-cars] RE: Intake Air Temp Code


> Nick,
> I have the same issue with my 200 20v.  The engine light sometimes stays
> on after starting (hot or cold), and the light eventually goes out.  It
> always goes out under boost.  VAG-COM says 00523 - Intake air sensor
> (G42) Open or short to B+.  Wiring looks OK, but I haven't done any
> testing.  I will ask at Audi about reliability of the sensor, or if we
> should be looking elsewhere.  Anyone else seen this?
>
> Tom Mullane
> 91 200
> 99 A6
> Etc.
>
>
> From: NDoshi at aol.com
> Date: Mon, 30 Sep 2002 12:00:37 EDT
> To: s-car-list at audifans.com
> Subject: [s-cars] S6 - Intake Air Temp Code
>
> --
> [ Picked text/plain from multipart/alternative ]
> Hello all,
> my s6 keeps throwing the intake air temp intermittent code (on vag-com).
> I
> wanted to know if this was a common occurrence and what the common diag.
> procedures are.
>
> Thanks in advance
>
> Nick Doshi
> 1995 s6 avant
> (soon to be mine - 1993 S4 Sedan, hey like the beer ad says - twins!!)
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list