[s-cars] What's the depth of your wastegate screw?

[Mihnea Cotet]

Stock AAN/ABY WG screw depth is about 11 mm if memory serves, measured from
the WG cap. MTM recommends indeed 5 or 6 turns if the stock spring is still
used. On stock SW, WG depth isn't very relevant, but by the way, who's
still running stock SW in an UrS car? :-)


HTH,

Mihnea


At 12:49 31/03/2003 -0500, James Murray (LMC) wrote:
>This message is in MIME format. Since your mail reader does not understand
>this format, some or all of this message may not be legible.
>--
>[ Picked text/plain from multipart/alternative ]
>I'm wondering about wastegate screw settings (screw depth), is there an
>optimal setting? (or is this ECU S/W dependent). I remember a posting way
>back that mentioned when upgrading to MTM S/W they recommended turning in
>about 5 to 6 times (what depth would that be?).
>
>What's the original depth of the wastegate screw?
>
>What's the optimal depth for improved performance?
>
>Cheers, /Jamu.
>
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list