[s-cars] correct wheel bolt length - BBS RKIIs et35 on UrS6 w/ Big Reds

[Fred Munro]

Ken;

Bolt it up, jack it up, and take a look at the wheel bolt holes on the inner
face of the hub. The end of the bolt should be flush with the hub face. If
the bolts are too short, the end will be inside the hub flange. The length
they are inset is how much longer they have to be for your rotor/wheel
setup.

HTH

Fred Munro
'94 S4


-----Original Message-----
From: s-car-list-admin at audifans.com
[mailto:s-car-list-admin at audifans.com]On Behalf Of Ken Ng
Sent: April 4, 2003 2:59 PM
To: s-car-list at audifans.com
Subject: [s-cars] correct wheel bolt length - BBS RKIIs et35 on UrS6 w/
Big Reds


anyone know the proper bolt length for my setup -

BBS RKIIs et40 - UrS6 w/ Brembo A8 314x30mm front
rotors... stock rears..

wheels are used and off of a neuS4 with stock
brakes... have the used bolts for the neuS4 set up,
but was wondering if i need a longer
bolt for mine...

thanks in advance...
ken

__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list