[s-cars] Canadian Source of Drag Link Socket

[Sean Douglas]

Dave:

I have one that I used on my 90q to replace the rubber seal under the
X-plug. The blade is 11/16 long by 1/8th thick and it is 3/8 drive. You can
borrow it if you want.

Bought it from Snap-on, the p/n is GF22.

Sean Douglas


----- Original Message -----
From: "Dave Forgie" <forgied at direct.ca>
To: "s-cars" <s-car-list at audifans.com>
Sent: Saturday, April 12, 2003 4:40 PM
Subject: [s-cars] Canadian Source of Drag Link Socket


> I have not been able to source a drag link socket to change the PS
> X-plug.  The leads to a US Napa part number and a US Sears/Craftsman
> part number don't work in Canada. Anybody in the Great White North
> (Fred?) who have actually found one and could give me a good part number
> to chase?  I haven't tried Snap-On as they aren't very retail but I
> would if that is the only way.
>
> Dave F.
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list