[s-cars] MAF screen removal-please explain

[QSHIPQ at aol.com]

I'm quite fine with that, and I believe this is where the disussion left off way back when.  I'd also make a mental note of this DIY mod when one might fail emissions.


SJ

In a message dated 4/19/2003 10:46:24 AM Eastern Standard Time, CaptMagu writes:

> MAF and remove
> the screens. You might want to establish some sort of baseline test before
> and then test again after. I like to use a 6th gear pull up an incline. I
> establish at what rpm I develop full boost. I start the pull at 2500rpm and
> go to full throttle. I simply note at what rpm I develop full boost. Right
> now, I'm at 3200rpm. If things are better great leave the
> screens off. If not
> put them back in. HTH
>
> Hap, wonderin in Everboost, Maguire