[s-cars] RSB's-2 - Adapter Kits done & ready to mail out

[Joseph Pizzimenti]

For those of you on the proverbial fence about this
thing, don't be.  Your choice is clear here.  If need
be, use tax return or whore out a loved one for the
550-600 you may need to complete this modification.
No more body roll.
Power on oversteer.
The car just ROTATES, NO MORE UNDERSTEER (that is,
unless you go into a turn hot and off the gas, then
all you have to do is gas it and back off and the rear
comes around.)

It's not too much, it's not too little, it's PERFECT.

Do it.

Joe
--- MLP <mlped at qwest.net> wrote:
> OK, for those who ordered adapters to fit Haps 26mm
> rear stabilizer bar.
> Since I haven't got a list from Hap yet of who's
> ordered the 26mm bar & its
> associated parts (i.e. the bar itself, two heim
> joints and two 26mm urethane
> bushing at a minimum), I have to presume you know
> who you are if I haven't
> included your initials below.
>
> Anyhow, as far as the adapters are concerned, FYI, I
> picked up the completed
> adapter parts yesterday.
>
> I've checked with the Postal Service &/or UPS (you
> tell me your shipping
> preference); and am ready to mail these, the adapter
> parts, out as soon as
> you:
>
>   (a) make &/or confirm payment.  The cost of
> Adapters alone is $150 +
> shipping.  So far as I know, the adapter plates &
> lock keys are not a part
> of Hap's 26mm rear stabilizer package.  Payment for
> the adapter plates can
> be made either by:
>
> 	1.  PayPal to mlped at qwest.net or
> 	2.  Check mailed to:  M Pederson, 8775 E. Orchard
> Rd. #819
>              Greenwood Village, Colorado 80111-5010
>
>   (b) select method of delivery,
> 	1.  US Postal priority mail, @ $10.  USPS says this
> is supposed to
> promises 2nd day delivery; or
> 	2.  UPS 3 day @ $13 (Denver/ East or West coast)**
>
> UPS Ground @ $8.67; 2nd day 18.21 and overnight is
> $29+.
>
>   (c) confirm where you want the adapters
> mailed/delivered to.  It would be
> good to include a phone number if you want that
> included on the UPS label if
> that's the way you want them shipped
>
> For the extra $3.00 over the US Postal Service fee,
> UPS tells me they offer
> insurance & a tracking number if I give them email
> addresses.
>
> For those who've asked or suggested they think that
> they may have already
> paid for adapters with their 26mm rear stabilizer
> kits from Hap, I do not
> know what arrangements, if any you have made with
> Hap, but so far I have not
> received payment from anyone for any adapter kits,
> and I am not privy to
> what arrangements have been made with Hap regarding
> the adapters, as
> distinguished from the bar itself.  While I have
> spoken to Hap, he has not
> yet had time to send me the list of persons to whom
> he wants or needs
> adapters sent to.**   I've tried to put together a
> partial list, below, of
> those who've contacted me directly.
>
> I suppose an additional option for those who are
> still waiting for 26mm RSB
> parts from Hap is, I can turn your plates over to
> Hap to pack in with his
> rear stabilizer bar and other parts, if he has not
> already sent those pieces
> to you when I can confirm payment for the adapters.
>
> Finally FYI, the RSB adapter kit parts I'm supplying
> weigh @ 4 lbs +/- a
> couple of ounces; each kit includes eight pieces,
> consisting of two (2)
> Adapter plates; two (2) for want of a better
> description "locking Keys"; and
> four (4) bolts.  All the other parts you need to get
> with Hap's kit or from
> Audi.  If your not sure how to install, I can burn a
> CD with the install
> instructions that were created for the original
> group of RSB adapters that
> was done @ year or so ago.  The major difference is
> the current kit doesn't
> include the aluminum saddles that were used to hold
> the Audi OEM rubber
> bushings for the OEM 17mm stabilizer bar.  BUYER BE
> AWARE:  As a final
> CAVEAT AND WORD OF CAUTION, you are installing a
> 26mm bar on brackets and a
> rear sub frame that, even from Audi, only used at
> most a 17mm bar.  You do
> this at your own risk.  NO WARRANTY & NO GUARANTEE
> is made or given as to
> the suitability of the adapter or its use of the sub
> frame mounting points
> for this purpose.
>
> If you've got any other questions that would be
> easier to answer by
> telephone, I can generally be contacted at
> 303-888-1941.
>
> Mike Pederson
>
> Kits confirmed for:
>    Initials:	Address:		Paid:
> 1.  RT, mass	yes, office ?	No
> 2.  RC, NY		yes			No
> 3.  CS, Ohio	yes			No
> 4.  DL, Colo	? no			No
> ***** ? Not on or in Hap's list for 26mm RSB's, but
> interested in an adapter
> if available:
> 5.  MH, ???		? No			No
> 6.  JP  ???		? No			No
> 7.  Elijah, MI?	? No			No
>
>
>
>
>
>
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list


=====
-------------------------------------
The following statement is false.
The preceding statement is true.
-------------------------------------

__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com