[s-cars] Bypass valves - Which one?

[Joseph Pizzimenti]

Bailey stinks, especially for that cfm you're flowing,
Gary.  The internals are still rubber/plastic.  The
TXS 34mm is too big for our plumbing, unless you have
the 2Bennett Samco?  I used the TXS H-25 on my RS2
turbo, clean as a whistle.

Joe

--- "Lewis, Gary M" <gary.m.lewis2 at BOEING.COM> wrote:
> I'm running:
> RS2 MAF, RS2 Exhaust Manifold, RS2 Injectors, Custom
> Turbo (K26 Turbine, Factory K26 Cold side (Audi
> Works '999' P/N) with 50mm intake and custom
> Innovative Turbo compressor wheel, life begins at
> 3,400 rpm)= RS2 Comp++, and 26 psi VMAP-D software. 
> Call it 375hpish.
> 
> I've looked at Hyperboost, Forge, Bailey, and the
> TurboXS H34.  The Bailey looks the best, but
> opinions?
> 
> Thanks,
> Gary Lewis
> 
> 1995.5 S6 Avant, Green/Ecru, RS2 MAF, RS2 Exhaust
> Manifold, RS2 Injectors, Custom Turbo (K26 Turbine,
> Factory K26 Cold side (Audi Works '999' P/N) with
> 50mm intake and custom Innovative Turbo compressor
> wheel), Bilsteins, Eibachs, Big Reds, Spec II
> Clutch.
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list


=====
-------------------------------------
The following statement is false.
The preceding statement is true.
-------------------------------------

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/