[s-cars] need more power

[James Murray (QC/EMC)]

Missing from the list is the complete exaust (ala Stromung, or something less comparable)... not sure the HP gain? (guess it depends if that's with or without cats...). 

/Jamu.

-----Original Message-----
From: mlp qwest [mailto:mlped at qwest.net]
Sent: Friday, December 19, 2003 11:35 PM
To: Lewis, Gary M; kristy; S-CAR-List at audifans.com
Subject: RE: [s-cars] need more power


A possible "standard part" omission in your formula for power Gary would be
a cam (the RS2 exhaust side only) or cams, you pick the flavor.

Maybe the list knows:
(a) what the RS2 exhaust cam is now going for $???; and
(b) perhaps even more interesting, worth +??? bhp/ft-lbs


mlp

~-----Original Message-----
~From: s-car-list On Behalf Of Lewis, Gary M
~
~There really is no right, just shades of better...
~
~For example, here are the Basic upgrades, but there are shades
~between them that others can talk about.  (all numbers are
~approximates, but close enough for this exercise)(Does not include
~installation):
~
~"Stage I" (where you are now) - ~270hp
~
~"Stage II" - Exhaust manifold - ~$900 = ~280hp
~
~"Stage III" - Exhaust manifold ($900), RS2 turbo ($1,800),
~software ($500 w/ 3.0 Bar transducer), ~$3,200 = 320hp
~
~"Stage IV" - Exhaust manifold ($900), custom turbo (~$1,000),
~software ($450), injectors (~$550), Mass Airflow Sensor ($250) =
~~$3,200,  ~360hp (the spec I have)
~
~"Stage Insanity" - $$$$$$$$$, but goes nice...
~
~Gary Lewis
~
~1995.5 S6 Avant, Green/Ecru, RS2 MAF, RS2 Exhaust Manifold, RS2
~Injectors, Custom Turbo (K26 Turbine, Factory K26 Cold side (Audi
~Works '999' P/N) with 50mm intake and custom Innovative Turbo
~compressor wheel), TurboXS Type 25 Bypass Valve, Bilsteins,
~Eibachs, Big Reds, Spec II Clutch.
~
~


_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list