[s-cars] O2 Sensor

[Richard Tanimura]

Jerry,

You might want to put an ohm meter across both white's and see if they are
shorted together (0 ohms). Then you will know.

Rich

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]On Behalf Of Jerry Scott
Sent: den 24 december 2003 03:06
To: s-car-list
Subject: [s-cars] O2 Sensor


I just bought the Bosch 13913 O2 Sensor at Pepboys for $45, which
requires rewiring since the connector supplied does not fit the Audi
connector. The sensor has two white wires and one black. I am assuming
that when wiring into the existing wiring harness that the two white
wires are interchangeable, otherwise they both would not be the same
color.  Did anyone have a problem with this when hooking it up?
Jerry


_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.552 / Virus Database: 344 - Release Date: 2003-12-15

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.552 / Virus Database: 344 - Release Date: 2003-12-15