[s-cars] Seat heater

[Wayne Dohnal]

>So on the seat heater, I got 9v on the black/white wire in the green plug
w=
>ith the switch to any of the on positions.  I do not get 12v at the
black/y=
>ellow wire - I only get 2v.  I get nothing on any of the other wires in
the=
 >plug, but might expect this if I'm not getting the base line 12v I'm
suppo=
>sed to be getting.  So can anyone help?  Is there a problem with the
switch=
> do you think?  I'm also confused about the fuse.  Thanks.
>
>John

Assuming that one of your seat heaters is working, how about taking
measurements on the working seat and seeing how they differ from the
non-working seat?  Here are the measurements I got off of mine, ignition on,
engine not running, meter negative on the brown wire:

Blu-yel (heater power feed) 11.04
Brn-blu (series element connector) 5.65
Brn-yel (temp sensor) 0.21
Blu-wht (temp sensor) about 2, varied as seat heated up

These wire colors are what go into the green connector.  On mine the blk/wht
and blk/yel wires go into the red connector shell.  You could also verify
that the brown wire is in fact a good ground.

Wayne Dohnal
1994 S4