[s-cars] A/F Gauges redux

[Robert Myers]

--
[ Picked text/plain from multipart/alternative ]
Hi Y'all,

I've been thinking again.  I've found that thinking seems to get me into
trouble almost every time I try it.

I pulled out the instrument cluster on my urS6 to replace some light bulbs
and saw a really nice spot which looks almost exactly the right size in
which to mount an A/F gauge.  Take a look at http://splitsec.com/ and check
out their ARM1 meter.   I think that thing turned so the light display goes
up/down rather than right/left should fit nicely in the unused space
(blacked out with a plastic black box.  The box measured just barely over
7/8 inch wide by 2 1/4 inch high by almost any depth you want within
reason.  That's approximately 23 mm by 57 mm.  The opening covered by the
box is 9/16" (14.3 mm)  by 1 7/8" (47.6 mm).  This opening is narrower than
the A/F gauge but it is large enough that the display portion of the gauge
face should be fully visible through the opening.

The dimensions shown for the A/F meter are 0.78" W by 2.265" H by 1.51"
D.  The height may be just a little bit tight but some careful
"adjustments" would probably permit it to fit in the available hole.

D'ya think it will work?  Anybody have a better suggestion?

Bueller?

____

Can't find Osama? Bomb Iraq!

Bob
*****
  Robert L. Myers 304-574-2372
  Rt. 4, Box 57, Fayetteville, WV 25840 USA WV tag Q SHIP
  '95 urS6 Cashmere Grey - der Wunderwagen  ICQ 22170244
  http://www.cob-net.org/church/pvcob.htm
*****
--