[s-cars] The Audi position on crimped or coldered connections

Peter Schulz peschulz at cisco.com
Fri Feb 21 10:02:36 EST 2003


Folks:

This thread comes up occasionally, especially in when the use of generic O2 sensors is dicussed.
The thread usually comes down to personal opinions and personal experiences...

I found the official Audi position on whether repairs should be soldered or crimped at:
http://steve-hall.com/audi-tsb/tsb/97-98-02.pdf

Bottom line, repairs should be done using a proper crimp, vs a soldered joint.

Good indexed crimping tools (with replaceable dies) can be found in electronics stores, online, even at Homey Depot in the cable tv connector area.
The preferred die for the crimping tool has is called a "B" crimper.

HTH
-Peter



Peter C. Schulz					peschulz at cisco.com
Quality Systems Engineer/SSE			http://www.cisco.com
Customer Contact Business Unit (CCBU)		Direct: 978.497.7772
Cisco Systems, Inc. 				Fax: 	978.497.1705
900 Chelmsford Street 				Pager: 	800.365.4578
Lowell, MA 01851 USA






More information about the S-car-list mailing list