[s-cars] Ski bag installation / replacement?

[Brent Henry]

Dave,

I guess you might be right about the klutz thing... mine was sheer
frustration... I had been working on that ski-bag for 2 hours last night and
then another 2 hours this morning!  I couldn't believe it was so difficult
to get it back in... or rather is still so difficult to get it back in... as
mine is still not in!

I have taken your advice on the epoxy for the broken hinge... which seems to
be holding for the time being!  I will let it dry over night before I give
it another try!

Any words of wisdom before I set out into the unknown world of ski-bag
installation???

Literally the last one that I put in my '95 A6Q took me all of 2 minutes?
I'm thinking that the metal rim must be bent or out of shape somehow?  But
it looks good?

Thanks for the tip on the epoxy... I tried a couple of different types of
glue that did not hold... but the epoxy is looking good so far!
Brent.

----- Original Message -----
From: "Dave Forgie" <forgied at direct.ca>
To: <thehenrys at sympatico.ca>; "s-cars" <s-car-list at audifans.com>
Sent: Saturday, February 22, 2003 2:08 PM
Subject: [s-cars] Ski bag installation / replacement?


> Brent: Either we (you and I) are both klutzes OR there is a design
> problem with the ski sack.  I had exactly the same problem and broke off
> one of the hinges trying to get the sack back in.   I got the ski sack
> back in (eventually) but still have the "lid" here in my office - I was
> going to epoxy the hinge back on (now, where did I put that spring???).
>
> Dave F.
>
>