[s-cars] Cams and Springs.

[Trevor Frank]

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]

I was talking to Javad and others about Cams and Springs.  I was
wondering if anyone has had a cam grinder build them a custom cam for an
AAN motor and if so who and generically what duration, lift, lobe
centers they used.  When I rebuilt my head I put in improved springs but
on the spring rate tester they came out to be only 20lb or so more per
inch than stock, actually if that.   Javad recomended a company that has
some springs I was wondering if anyone else has used some other springs
from one of the big valve and spring manufactureres, Ferrea, Isky,
Crower, Del, Manley.....

I have been talking to the local cam grinder about doing a custom cam,
does anyone have a core that I could borrow, I would be happy to give
you mine after I had the cam ground.

I would also be interested if anyone has a cam doctor or other file of
the RS2 or 7A or even stock cam.  Or if I could borrow one to turn it in
on a cam doctor.

Thanks,

Trevor.

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. that may be confidential,
proprietary, copyrighted, privileged and/or protected work product,
and is meant solely for the intended recipient. If you are not the
intended recipient, and have received this message in error, please
contact the sender immediately, permanently delete the original and
any copies of this email and any attachments thereto.