[s-cars] Eibachs for Avant

[Mark Strangways]

I just recently had the Bilstien shocks grooved and a ring installed to
allow me to set the height.
Worked well, and since I had no spacer...

The cars sits nice now, but I could use the next groove and pump up the back
about 1/2 inch or so.

Mark S
----- Original Message -----
From: "Stefan Richter" <stefan13 at att.net>
To: <s-car-list at audifans.com>
Sent: Wednesday, July 16, 2003 10:33 PM
Subject: [s-cars] Eibachs for Avant


> This is a multi-part message in MIME format.
> --
> [ Picked text/plain from multipart/alternative ]
> The Eibachs are one their way.  Scott at shox assured me these are the
> proper part for the Avant and will NOT need any spacers in the back.  I
> installed 10mm spacers on the sedan a few years back, knowing that they
> were required.  Did the Avant springs have the same problem, i.e. too
> low in the back?  While I don't mind putting the spacers in, I don't
> want to do this job twice.  Any help is, as always, appreciated.
>
> Also, to those who followed the thread on the guy who bought my sedan,
> the culprit was indeed the ignition switch - got stuck in crank
> position.
>
> Stefan Richter
> back to one S-car :-(, but wife is happy :-)
>
>
> --
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list