[s-cars] Cone filter air induction conversion

[Andrew.Jackson at bmo.com]

Hi JC,

I've just installed this kit from Dahlback Racing  originally made for the
Euro S2's on my AAN'd Coupe:

http://216.110.167.205/~dbrace/audi/s2/filterkit.jpg
(full link: http://www.dahlbackracing.se/audi/s2/ovrigt.asp?Language=1 )


This is what they offer for the S4/S6 engine bay:

http://216.110.167.205/~dbrace/audi/s4s6/openair.jpg
(full link: http://www.dahlbackracing.se/audi/s4s6/ovrigt.asp?Language=1 )


Orignally, I simply had a K&N cone connected directly to my MAF.   The
sounds of the turbo spooling and the BPV recirculating the air pressure
was LOUD.
(A good thing or a bad thing.. depending on your tastes.)

With the additional tubing in the Dahlback kit, the "noise" is somewhat
subdued.
Performance has noticably increased over my previous setup because of the
better location of the filter, the better heatshielding and the abiltiy to
go with a MUCH larger air filter.


As a side note, I also gave the DBR BPV a shot and I'm pleased with it so
far.  (Cheaper than a Forge and no more honking!)



Just throwing out options,  YMMV


HTH

ALJ





jcdavidson2 at juno.com
Sent by: s-car-list-admin at audifans.com
06/01/2003 12:57 AM


        To:     s-car-list at audifans.com
        cc:
        Subject:        [s-cars] Cone filter air induction conversion



Does anyone have a cone air filter conversion kit for a '93 URS4?  Any
suggestions for home made kit.  Experiences please.

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list