[s-cars] (un)clear corner
Philip Mische
pmische at comcast.net
Sat Jun 7 16:01:26 EDT 2003
I found this to be a pretty unusual mounting scheme, but after some
examination I found it did make sense.
To remove the existing light you have to turn the little white plastic screw
1/4 turn, which then allows that part of the mount to be pushed straight
down to clear a boss on the car so the corner light can slide forward.
Reinstallation requires that you slide the corner light in far enough so it
can clear the boss and allow the mount to pop up; turning the little white
plastic screw the other way keeps the mount engaged behind the boss.
It will be much more obvious how it works after you remove it from the car!
Phil Mische
95.5 S6
----- Original Message -----
From: <Airbil at aol.com>
To: <s-car-list at audifans.com>
Sent: Saturday, June 07, 2003 12:14 PM
Subject: [s-cars] (un)clear corner
> --
> [ Picked text/plain from multipart/alternative ]
> Before I spend half a day changing to a clear corner; how do you get these
> out? This is simple right? Is it just turn one nylon screw and push out
or is
> there more to it? Where do you push from?
> TIA
> Bill m -corked in chgo:/
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-car-list
mailing list