[s-cars] getting her back together

[Robert Pastore]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
Elijah:

I agree with Hap -- use a flexhone (around $50) to lightly clean up the
cylinders.  If you don't break the glaze, the new rings will take forever to
seat.

Bob

-----Original Message-----
From: Elijahallen92 at aol.com [mailto:Elijahallen92 at aol.com]
Sent: Tuesday, June 10, 2003 9:15 AM
To: s-car-list at audifans.com
Subject: [s-cars] getting her back together


--
[ Picked text/plain from multipart/alternative ]
Hi everyone,
 I spent last night switching stuff over to the new ported,polished,etc.
head
I bought from Hap. I also took the pistons out and replaced the rings and
put
the pauter rods on. Today I am going to try to get everything back together
and wondered if the cylinders need to be honed. They look fine, with no
visual
damage so I was leaning toward not honing them but thought I'd ask. Thanks,

Elijah
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list