[s-cars] Advice on Changing out Exhaust Cam?

[Trevor Frank]

I wouldn't do it with ought changing the lifters, for that cam.  I would
definitely do the cam timing chain also.

If you haven't already change out the cam timing belt and the aux belt,
as well.  You could also do the idler bearing for the timing belt and
the timing belt tensioner.  Hek you could do the whole timing belt
thing, it will be off anyway.

-----Original Message-----
From: Chad Frederick [mailto:cfrederick at myrealbox.com]
Sent: Friday, June 13, 2003 12:14 PM
To: s-car-list at audifans.com
Subject: [s-cars] Advice on Changing out Exhaust Cam?


Tomorrow I am changing out my AAN Exhaust Cam and giving the 7A Exhaust
Cam a "try."  I've been through the Bentley procedure and it looks
relatively straight forward.  Any words of advice before digging into
it?  BTDT's?  How long should it take me? I have a new valve cover
gasket and camshaft seals to replace while I am in there.

Finally, anyone in WA State have any problems passing emissions with the
7A cam installed in an AAN or 3B?

Chad Frederick

Seattle





_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. that may be confidential,
proprietary, copyrighted, privileged and/or protected work product,
and is meant solely for the intended recipient. If you are not the
intended recipient, and have received this message in error, please
contact the sender immediately, permanently delete the original and
any copies of this email and any attachments thereto.