[s-cars] What springs would lower our cars the most?

[Trevor Frank]

Dan I have a set of V8 springs for the audi that I used as my fronts on
my S4, they are so low that you basically get no shock travel in the
front, they are yours if you pay shipping.

-----Original Message-----
From: Dan Bozga [mailto:audisport44 at yahoo.com]
Sent: Saturday, June 14, 2003 2:14 PM
To: s-car-list at audifans.com
Subject: Re: [s-cars] What springs would lower our cars the most?


--
[ Picked text/plain from multipart/alternative ]
So what's wrong with the H&R 200 20 valve springs?  What do you
reccomend on a 93 S4 if I want to go as low as possible, and how much do
you think they will lower the car? So far from previous experiences with
H&R's is that they don't lower the car as much as I would like to at
all, you still have some pretty big gaps.

Dan



Steve Marinello <smarinello at charter.net> wrote:You DON'T want the 200q
20V springs! Got them off the '95 S6 I bought and ran with '92 springs.
Believe me, even the correct H&R's lower the car too much; Eibach's a
little less. I like the '92's for everyday driving around here more than
the Eibach/Bilstein combo on the avant. My choice next time will
probably be the euro S6+ springs....although I've got a new set of the
correct Eibach's sitting in the garage that I ordered before finding the
'92's. We'll see what the next one has on already.

Steve
----- Original Message -----
From: "Dan Bozga"
To:
Sent: Saturday, June 14, 2003 1:17 PM
Subject: [s-cars] Waht springs would lower our cars the most?


--
[ Picked text/plain from multipart/alternative ]
I was looking at the H&R's for our cars but they only drop the car like
1.3 inches and that's not enough for those huge gaps between the wheels
and fenders. The 200 20 valve H&R springs lower that car about 1.5
inches so since our cars are heavier I was thinking that if I use those
it might lower the car even more. Another alternative I was thinking
about is Intrax springs for the regular Audi 100 Quattro (C4) which are
supposed to lower that car 1.75 inches, would it lower our cars that
much too or are the S4's already a bit lower than the 100's? It's hard
to tell since they both have huge gaps between the wheels and fenders.
Are there any other alternatives? Any other springs/combinations? I want
to go as low as possible, trying to eliminate as much of the gaps as I
can.

Any help would be appreciated.

thanks

Dan


---------------------------------
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list



---------------------------------
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. that may be confidential,
proprietary, copyrighted, privileged and/or protected work product,
and is meant solely for the intended recipient. If you are not the
intended recipient, and have received this message in error, please
contact the sender immediately, permanently delete the original and
any copies of this email and any attachments thereto.