[s-cars] Brake light? Problems?

[Bob Rossato]

You may have a break in the wires for the wear sensors.  Disconnect the wear
sensor harness on one side and bridge the pins on the vehicle side harness.
Does the light go out?  If yes, then there is a break in the short harness
coming from the pad.  If no, then reconnect the harness on that side and
repeat the test on the other side.  If neither side makes the light go out
when the harness is bridged, then the break is further up the line on one of
the harnesses and will require a little more hunting.

Bob

> -----Original Message-----
> From: s-car-list-admin at audifans.com
> [mailto:s-car-list-admin at audifans.com]On Behalf Of No Spam
> Sent: Tuesday, June 24, 2003 9:28 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] Brake light? Problems?
>
>
> I have a 95 S6 and a warning light just started to
> appear....it looks like a set of brake pads there
> where the radio usually displays. I just pulled the
> wheels and the brakes pads look like 50% or more
> remaining.
> Any ideas? Anything else I can check before I take it
> into the shop?
> Thanks ahead of time for any help or suggestions...
>
> -Ron