[s-cars] 3b flywheels

Steve Eiche seiche at shadetreesoftware.com
Fri Mar 7 08:13:47 EST 2003


Bob,
I myself bolted one to an AAN.  You are correct in that the flywheel
won't work in an S4/S6. As I described below, this is because of the
transmission, NOT the engine.

Steve

Bob DG wrote:
> 3B flywheel WILL NOT work with S4/6, Won't match up with the crankshaft.
> BTTT
>
>
>
>
>
>
>> From: Steve Eiche <seiche at shadetreesoftware.com>
>> To: saltinot at alltel.net, s-car-list at audifans.com
>> Subject: Re: [s-cars] 3b flywheels
>> Date: Thu, 06 Mar 2003 20:14:53 -0700
>>
>> Tom,
>> Just about any Audi flywheel with work with an AAN. Yes, the timing pins
>> are in the right places comparing the flywheel used on 3B '91 200qs with
>> the flywheel from an AAN car.  BUT, he flywheel needs to match the
>> transmission.  The 3B flywheel will ONLY work with an 016 type
>> transmission, not the O1E like the ur S4/S6, etc.  The 016 transmission
>> cars have the pilot bearing in the crankshaft, whereas the 01E/01A cars
>> have the pilot bearing in the flywheel.  Does this make sense?
>>
>> If you want a lighter solid flywheel for an 01E transmission, get a
>> '90-'91 CQ flywheel and have it lightened, or get one of the aluminum
>> 01E flywheels that were modelled after the CQ flywheel.  There are few
>> vendors for these I believe.
>>
>> HTH!
>>
>> Steve
>>
>>
>> Does anyone know if you can run the 3B flywheel with an AAN?  Does the
>> 3B flywheel have the correct marks for the timing and speed sensors?
>>
>> What clutch offerings are there for this setup?
>>
>> Tom
>>
>> _______________________________________________
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
>> http://www.audifans.com/mailman/listinfo/s-car-list
>
>
>
> _________________________________________________________________
> MSN 8 with e-mail virus protection service: 2 months FREE*
> http://join.msn.com/?page=features/virus
>
>




More information about the S-car-list mailing list