[s-cars] Q about supercharging an A4 2.8

[QSHIPQ at aol.com]

--
[ Picked text/plain from multipart/alternative ]
I've installed 2 of the PES supercharger kits on the v6, one a 30v, both a4
chassis.  Very nicely done kit, a day to install, add 100ponies.  Very
smooth, well done kit.  My only complaint was figuring out where the very
nice CNC bracketry fit, not clear on the instruction sheet.

There are quite a few of these running around chicagoland.  My only
recommendation would be to install an oil cooler for the extra peace of mind.
 I managed to fit (albeit tight) a 25 row behind the bumper.

HTH

Scott Justusson
QSHIPQ Performance Tuning
Chicago
In a message dated 3/8/2003 10:01:43 AM Central Standard Time,
gregsj2 at attbi.com writes:

Gents,

I've been researching this issue as well.  The largest information source
I've found thus far is Supercharged at yahoogroups.com  It's members only and
most of the members have PES SCs, but they also let interested folks join.
Read the posts and draw your own conclusions.

Greg J
BIRA.ORG


Jeff and Jeremy wrote:


>Scott,
>FWIW: European Car did a review a few months ago and raved about the PES
SuperC. I'll try to pinpoint the issue for you.
>It's a real bolt on , easy method to rev up the 2.8
>JPosto
>
>Jeremy Hull <jeremy.c.hull at boeing.com> wrote:I hate to admit it, but owning
an A4 (1.8t), I have spent I alot of time on
>the A4 board over on AudiWorld. Try doing a search over there, it is not as
>popular as modding the 1.8t, but I have not seen anyone who has had the PES
>SC installed complain one bit.
>