[s-cars] 314mmx30 brake calipers S6+ euro setup?

[Bob Rossato]

Actually, the 314x30 are standard S6 and S6 4.2 (AEC) brakes for everywhere
but North America.  The S6+ brakes are 323 x 30.  Either kit will require a
different strut than what is presently on the car.  Like others have said,
stick with a Big Red/Big Black setup like that on your S4 (and you can also
get Big Silver and Big Yellow).  I'm putting together a kit like Linus
mentioned using the RS2 brackets, but with 2-piece rotors to cut down on the
rotational mass.  You could also go with the ECS Stage 2 or 3 kits.  If you
can get in on the latest GP price it is hard to beat.

Bob

> -----Original Message-----
> From: s-car-list-admin at audifans.com
> [mailto:s-car-list-admin at audifans.com]On Behalf Of Linus Toy
> Sent: Monday, March 31, 2003 3:42 AM
> To: 'Thompson Smith'; s-car-list at audifans.com
> Subject: RE: [s-cars] 314mmx30 brake calipers S6+ euro setup?
>
>
> Yes, you've found the S6+ setup...
> Those calipers you're asking about are the HP2 calipers, which showed up
> here on the neuS4 and A6/2.7tt and 4.2.
>
> I have no experience with HP2 brakes or their conversions (most popular is
> StopTech for the neuS4 crowd).  I suspect there are fewer brake
> pad options
> compared to the 993tt BR calipers.
>
> From where you are, the easiest upgrade would be to get the RS2
> brackets to
> replace your ECS brackets and use the US-spec A8L rotor
> (323x30)...gives you
> an all-Audi solution, with all consumables readily available in
> the US (i.e.
> either an Audi dealer, Porsche dealer, or appropriate local parts stores).
> The only "issue" with this setup is the classic, massive Audi rotor with
> relatively minimal vent veins, but then you've got that today, so no loss.
>
> --Linus
>
> --------------------------------------------------------
> Linus Toy               Insanity is doing the same thing
> Mercer Island, WA       you've always done and expecting
> linust at mindspring.com   different results
>                         - Roger Milliken, Milliken & Co
> --------------------------------------------------------
>
> > -----Original Message-----
> > From: s-car-list-admin at audifans.com
> > [mailto:s-car-list-admin at audifans.com] On Behalf Of Thompson Smith
> > Sent: Sunday, March 30, 2003 6:28 PM
> > To: s-car-list at audifans.com
> > Subject: [s-cars] 314mmx30 brake calipers S6+ euro setup?
> >
> >
> >
> >
> > I was surfing up elcats FA tonight and came across these big brakes >>
> >
> > 4A0 615 107        Floating caliper L
> > 4A0 615 108        Floating caliper R
> > 441 615 301 AA  Brake disc 314x30
> > 4A0 698 151 B    Pads - Girling
> >
> > Is this the S6+ setup? It says for AAN, AEC (V8) engine. The
> > illustration of the caliper with the Audi rings on it made me get all
> > giddy. Are these available? I have the 993tt red calipers (and maybe
> > these discs ECS stage II) on my S4. BTDT, Ideas you guys for this OE
> > Audi upgrade or stick with local hop ups?
> >
> > Thompson