[s-cars] 314mmx30 brake calipers S6+ euro setup?

[Philip Mische]

It is my understanding these are indeed the S6+ brakes - I have them on my
car.  They're okay and much much better than stock.  There was I time when
this was the hot setup, but if I had it all to do again I'd go with the
Porsche caliper / big rotor setup probably from Tom at ECS.  The Girling
calipers weigh a lot, and plus the pad selection is limited and silly
expensive.  Of course you can get pads made up with just about any compound.

If you insist I'll sell you mine - if they don't have the Audi rings I'll
scribe them on for you.

Phil Mische
95.5 S6

----- Original Message -----
From: "Thompson Smith" <carreragt at rennlist.com>
To: <s-car-list at audifans.com>
Sent: Sunday, March 30, 2003 9:27 PM
Subject: [s-cars] 314mmx30 brake calipers S6+ euro setup?


>
>
> I was surfing up elcats FA tonight and came across these big brakes >>
>
> 4A0 615 107        Floating caliper L
> 4A0 615 108        Floating caliper R
> 441 615 301 AA  Brake disc 314x30
> 4A0 698 151 B    Pads - Girling
>
> Is this the S6+ setup? It says for AAN, AEC (V8) engine. The
> illustration of the caliper with the Audi rings on it made me get all
> giddy. Are these available? I have the 993tt red calipers (and maybe
> these discs ECS stage II) on my S4. BTDT, Ideas you guys for this OE
> Audi upgrade or stick with local hop ups?
>
> Thompson
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list