[s-cars] 93 S4, front spring replacement and camber plate mod.

[MM2attys at aol.com]

--
[ Picked text/plain from multipart/alternative ]
Has anyone out there successfully changed out the front springs on an UrS4/6
without removing the front struts?  It appears as if one could get the spring
compressor under the fender well and gain enough room to get the spring out
by jacking the car up and the suspension down away from the subframe.  Also,
does anyone have photos or drawings to e-mail of the camber plate mod for the
front end of this car to get the correct alignment spec. when lowering the
car with Eibach springs.  A source for modified camber plates that were not
as costly as 2Bennett's would be helpful info. as well. thanks.  Mark