[s-cars] 93 S4, front spring replacement and camber plate mod.

[motogo1]

The holes in the strut mounts. Ooops, I guess I said camber plates, which
could cause confusion. I meant the strut mount...just make the slots that
are already there,  longer.

Gary

----- Original Message -----
From: "Rich Assarabowski" <konecc at snet.net>
To: "'motogo1'" <motogo1 at cox.net>
Sent: Friday, May 16, 2003 12:53 PM
Subject: RE: [s-cars] 93 S4, front spring replacement and camber plate mod.


> Gary:
>
> It's the holes in the body that are elongated (to move the entire camber
> plate), or the slots in the strut mounts (which are attached to the
> studs in the camber plates)??
>
> -- Rich
>
> -----Original Message-----
> From: s-car-list-admin at audifans.com
> [mailto:s-car-list-admin at audifans.com] On Behalf Of motogo1
> Sent: Friday, May 16, 2003 11:58 AM
> To: s-car-list
> Subject: Re: [s-cars] 93 S4, front spring replacement and camber plate
> mod.
>
>
> You can get very close or just in spec on camber by elongating the slots
> in the OEM camber plates. Mine is -1 degree 4' left side and -1 degree
> 14' right side using this method. Spec is .05' to -1.05'
>
> Gary Martin
> 94 UrS4
> 91 200 TQA
>
> ----- Original Message -----
> From: <MM2attys at aol.com>
> To: <s-car-list at audifans.com>
> Sent: Friday, May 16, 2003 10:09 AM
> Subject: [s-cars] 93 S4, front spring replacement and camber plate mod.
>
>
> > --
> > [ Picked text/plain from multipart/alternative ]
> > Has anyone out there successfully changed out the front springs on an
> UrS4/6
> > without removing the front struts?  It appears as if one could get the
> spring
> > compressor under the fender well and gain enough room to get the
> > spring
> out
> > by jacking the car up and the suspension down away from the subframe.
> Also,
> > does anyone have photos or drawings to e-mail of the camber plate mod
> > for
> the
> > front end of this car to get the correct alignment spec. when lowering
>
> > the car with Eibach springs.  A source for modified camber plates that
>
> > were
> not
> > as costly as 2Bennett's would be helpful info. as well. thanks.  Mark
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
>