[s-cars] Cruise control problems

[CyberPoet]

There is, on the V6 engines, a T-connector/tiny PCV valve on the
driver's side of the engine (above the spark plug lines) that provides
vacuum to the cruise control unit (93 100S). If the smallest hose at
this T-connector, or it's other end at the firewall (just in front of
the instrument panel's location on the engine side, high up on the
firewall) don't retain the vacuum or lose connection, the cruise
control stops working.

Hope that helps.
Cheers!
=-= Marc Glasgow
www.cyberpoet.net
Upgrading Macs in Tampa Bay since 1990

MIKE P WROTE:
My cruise stopped working. Actually, it's been dead
since winter. I had a clutch to get done first! Sice
that project is done, time for creature comforts. Does
anyone know where I should start looking? I have no
fault codes. I am thinking a vacumn line or sensor of
sorts.
Thanks