[s-cars] UPDATE: 95.5 S6 ECU REPAIRED & UPGRADED

[FvAMI at aol.com]

--
[ Picked text/plain from multipart/alternative ]
In a message dated 5/23/03 2:03:25 PM Pacific Daylight Time, cgharibo at usa.net
writes:


> . I sent my ECU off to Steve Eiche to repair the piece and install
> MTM 3 bar software who then sent it to Feico van der Laan to install a 4 bar
> VMAP (which Feico set to 2.9).
>
>

Thanks for all the kind words -- just want to add that this is the fresh off
the production line new VMAP-D. The VMAP-D is firmware upgradable, has full
Bosch emulation (we also have GM firmware) ... and naturally the precision mode
which approaches the theoretical ideal sensor similar to the VMAP4. It has a
10 pin header with mixed mode outputs and inputs to support future option
boards (which will only be released if the production cost can be brought down [no
promises]).

Current production firmware is
1) 3/2.5 bar selectable (Bosch/Precision mode selector)
2) 2.5 to 4.0 bar in 0.1 bar increments (Bosch/Precision mode selector).
3) 2.5 to 4.0 bar in 0.1 bar increments (GM/Precision mode selector).

The web site will be updated to reflect the new version within a few weeks.

Best regards,
Feico van der Laan