[s-cars] Garrett Turbo-034 intake

[Trevor Frank]

It 2.75 i.d. to the turbo and it is a pretty nice piece, I know because
I had to cut down the O.D. of my cold side to get it to fit, from 3" to
2.75.

-----Original Message-----
From: mlp qwest [mailto:mlped at qwest.net]
Sent: Friday, May 30, 2003 7:27 AM
To: hahnmgh63 at earthlink.net; s-car-list at audifans.com
Subject: RE: [s-cars] Garrett Turbo-034 intake


Mark, I'm not sure you want to hear this, but ....

There is the easy, but pricy, OTOH also kind of sexy 2Bennet custom
samco hose. Although, this may only come in a 3" ID to turbo coldside,
in which case you need a very short section of samco, or equivalent
2.75" ID hose, which just happens to be approx. 3"in OD.  Slip fit one
into the other to sleeve the 2bennet piece down to your Garrett coldside
OD of 2.75".

HTH
mlp

~-----Original Message-----
~From: Mark G. Hahn

~  Does anyone out there have a Garrett Turbo or at least a Garrett
~Compressor on their car? How did you connect the intake. Mine is 2.7"
O.D. ~on the compressor intake where the factory KKK is 2.2". Is there
any easy ~conversion? Thanks, MGH


_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. that may be confidential,
proprietary, copyrighted, privileged and/or protected work product,
and is meant solely for the intended recipient. If you are not the
intended recipient, and have received this message in error, please
contact the sender immediately, permanently delete the original and
any copies of this email and any attachments thereto.