[s-cars] T4OE/K26 Question

[Marc Swanson]

>   Wondering if anyone out there has a T4OE/K26 Turbo and what your
> impressions are? Does anyone have the Earl's or otherwise fittings list to
> adapt this to our cars? I just purchased a Turbo on was hoping someone else
> had already done this footwork.


I put the turbo you describe on my 4ktq.  Since this is a 10vt
application I'm sure the routing will be a bit different than for your
setup but if memory serves me correctly, the drain and supply flanges
are the same.  Rather than duplicate Javad's efforts, I'll just point
you to the page of parts that he put up:

http://www.034efi.com/turbo_lines.html


I did mine a little different.  I took a used stock oil supply line and
cut off the pipe leaving me with just the flange, then I welded an AN -4
male union (cut it half) to the base of the flange, giving me an easy
way to go to -4 AN.  As always, pictures are worth a thousand words:

the adapter:
http://makeashorterlink.com/?N19E26E94

return hose:
http://makeashorterlink.com/?J6AE52E94

supply line:
http://makeashorterlink.com/?D2BE42E94


hope that helps!

--
-Marc
87' 4ktq
88' 90q
www.mswanson.com/audi