[s-cars] Audi Avant Rear Gate Adjustment

[QSHIPQ at aol.com]

No trim needs to come off on the wagon.  There is an alignment pin on the L/R
outboard gate side, and a LR reciever on the body side, both are adjustable
slightly.  Shouldn't really need much as the alignment pin should self center
the gate.  What I have seen a couple times is on of the alignments pin on the
gate that snapped off causing one side of the hatch to not self center.

The center latch shouldn't require trim removal either IMS.

HTH

Scott Justusson
QSHIPQ Performance Tuning
In a message dated 11/4/2003 7:33:13 PM Central Standard Time,
cgharibo at usa.net writes:
I'd like to take out the stress from closing the rear gate on my Avant. Any
BTDT on adjusting the tail gate on tha Avant?

Does the rear trim need to come off?

Thanks,
Chris