[s-cars] RE: Riff's dyno #s

[Calvin & Diana Craig]

11:1 is definitely rich, and would explain excess HCs.  IME, optimal is
usually around 11.8:1 for power.
--Calvin


-----Original Message-----
From: s-car-list-admin at audifans.com
[mailto:s-car-list-admin at audifans.com]On Behalf Of riff944
Sent: Tuesday, November 11, 2003 2:00 PM
To: s-car-list at audifans.com
Subject: [s-cars] RE: Riff's dyno #s


Hi Guys-

According to some other people there, to get the crank HP from the wheel
numbers need to multiply by 1.35.  So 192.8whp * 1.35 = 260HP crank.  Anyway
that was what I was told.  From the web, I figured the MTM 1+ was good for
275-280hp crank, so it is not far off.  There are pixs from the event and a
graph for my car here, if you are so inclined:

http://www.ktrperformance.com/gallery/Events/AudiGTG/graphs_11_03.htm

I also have a A/F and  PSI graph for the run.  Tomorrow I will scan both
graphs and overlay them so you can check them out.  From the A/F, the car is
running rich never going over 11:1 from 3500-7200rpm.

Cheers,
Riff

S6 gross polluter.....

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list