[s-cars] Valve cover gasket
Gabriel Caldwell
gabriel at ts.bc.ca
Sun Nov 23 16:27:25 EST 2003
The valve cover is off. All it needed was good whack with a rubber
mallet. Now that it's off I'd like to clean it up a little. I'd like
to remove the aluminium oxidation. Any suggestions?
Gabriel Caldwell
Tsunami Solutions Ltd.
#202 - 2055 Boundary Road
Vancouver, BC Canada V5M 3Z1
voice: 604.299.5855
fax: 604.648.8158
e-mail: gabriel at ts.bc.ca
url: www.tsunamisolutionsltd.com
-----Original Message-----
From: Bob Frizzell [mailto:bobfrizzell at shaw.ca]
Sent: November 21, 2003 2:40 PM
To: Gabriel Caldwell
Subject: Re: [s-cars] Valve cover gasket
Gabriel,
The correct torque is 7 ft lb (10N). If yours is like mine it will be
very
brittle. Don't drop pieces in the plug holes. Although I didn't do so
on
mine, Trevor Frank suggested putting some Dow 111, a noncuring silicone,
on
the gasket. Good luck let me know if you have any problems. You have
a
number of good S-men in your area. I bought some wheels from Sean
Douglas
in Burnaby - seems like a real good guy . There are others I have
spoken to
(via email) but my computer crashed, and my brain did the same, so I
can't
remember who they were.
Take care,
Bob
----- Original Message -----
From: "Gabriel Caldwell" <gabriel at ts.bc.ca>
To: "Igor Kessel" <igor at s-cars.org>; "Bob Frizzell"
<bobfrizzell at shaw.ca>
Cc: <s-car-list at audifans.com>
Sent: Friday, November 21, 2003 2:36 PM
Subject: RE: [s-cars] Valve cover gasket
Was this the correct answer? I am doing my VCG soon and I am very
Bentley impaired.
Gabriel Caldwell
Tsunami Solutions Ltd.
#202 - 2055 Boundary Road
Vancouver, BC Canada V5M 3Z1
voice: 604.299.5855
fax: 604.648.8158
e-mail: gabriel at ts.bc.ca
url: www.tsunamisolutionsltd.com
-----Original Message-----
From: Igor Kessel [mailto:igor at s-cars.org]
Sent: November 10, 2003 5:23 AM
To: Bob Frizzell
Cc: s-car-list at audifans.com
Subject: Re: [s-cars] Valve cover gasket
Bob Frizzell wrote:
> This is a multi-part message in MIME format.
> --
> [ Picked text/plain from multipart/alternative ]
> S-men,
> I'm about to change my valve cover gasket. What are the torque
specifications for the bolts? I believe about 10ft lb. Does that sound
right?
> Always appreciative of the assistance,
Bob,
I believe it's 10 Nm, not ft.lb.
--
Igor Kessel
two turbo quattros
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-CAR-List
mailing list