[s-cars] ID this connector

[Kirby Smith]

I believe that Snap-On Tools has a kit for taking such connectors
apart.  I have the kit but have never used it on that connector, nor
looked at the particular pins on that connector to determine kit
compatibility.  Also, you may also need to order the pins as they may
not be included with the connector shell unless the pins are ok and only
the shell is decayed.

kirby


Robert Pastore wrote:
>
> This message is in MIME format. Since your mail reader does not understand
> this format, some or all of this message may not be legible.
> --
> [ Picked text/plain from multipart/alternative ]
> Ok Tom, you goaded me into actually helping KC!
> The connector on the CPS side is not repalceable ( but this isn't the half
> that is the problem)
>
> The connector is in ETKA A6Q MG-9/SG-71/Illustration 971-52
> It is partnumber 443 906 233.
> The rubber boot for it is 443 906 102G.
>
> The difficult part is to find the proper contact pin removal tool.  It is a
> Tyco/Amp part, but I do not find it in ETKA.  An easy way to remove the pins
> from a broken connector is to use a hot blade attachment on a solder iron
> and cut apart the old connector.
>
> Bob
>
> -----Original Message-----
> From: Tom Green [mailto:trgreen at comcast.net]
> Sent: Saturday, October 04, 2003 7:42 PM
> To: s-car-list at audifans.com; strangconst at rogers.com
> Cc: rpastore at animalfeeds.com; james.murray at ericsson.com
> Subject: Re: [s-cars] ID this connector
>
> > From: James Murray :
> >
> > Looks like the connector for the Cam Positioning Sensor otherwise
> > known as the Hall Sensor... better get it fixed otherswise no vroom
> > vroom !!!
> >
> > From: K.C. Madsen:
>
> > So, with pictures, I ask, "What is this connector?"
>
> > From: Mark Strangways
>
> > The CPS is at the back of the head as far as I read in the Bentley.
>
> > From: Robert Pastore
>
> > On an AAN, the CPS is bolted to the front of the head, behind the cam
> > pulley. Inside the back of the pulley  there is a stamped steel ring
> > with a
> > window in it which pases through the CPS to generate the hall signal.
>
> The Godfather speaks and  all is silent.  Well, Mark is still mumbling
> in the background, it's not my fault, It's Bentleys fault.   Another
> hard lesson learned.  Never argue with the Archive Hoar.
> This still leaves Kenneth wondering, where do I get the connector
> without buying the sensor, and how do I get the other half ?  Has
> anyone found a dealer willing to supply connectors since there are
> several crumbling connectors on many listers cars ??
>
> Tom '95 S6
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list