[s-cars] Brake Upgrade Help Needed. P/n's P/n's P/n's...

[Lewis, Gary M]

RS2 caliper bracket:  			8A0 615 125 A	Qty 2
A8L Rotors:					4D0 615 301 A	Qty 2
993tt Pad vibration dampers:		965 351 096 00 	Qty 4
993tt Calipers:				993-351-425-10 Porsche 993TT Front "Big Red" Caliper LEFT Qty 1
						993-351-426-10 Porsche 993TT Front "Big Red" Caliper RIGHT Qty 1

Probably more than you wanted to know, but there it is...

Gary Lewis

1995.5 S6 Avant, Green/Ecru, RS2 MAF, RS2 Exhaust Manifold, RS2 Injectors, Custom Turbo (K26 Turbine, Factory K26 Cold side (Audi Works '999' P/N) with 50mm intake and custom Innovative Turbo compressor wheel), Bilsteins, Eibachs, Big Reds.


> -----Original Message-----
> From: Fabryce [mailto:Fabryce at hartmann-motorsports.com]
> Sent: Monday, October 06, 2003 10:43 AM
> To: Linus Toy; 'Tom Feller'; s-car-list at audifans.com
> Subject: Re: [s-cars] Brake Upgrade Help Needed.
>
>
> Can any of you tell me what the part # is for the Rs2 caliper
> bracket../??
>
> Thanks
>
>
> Fabryce
>
>
> ----- Original Message -----
> From: "Linus Toy" <linust at mindspring.com>
> To: "'Tom Feller'" <tdfeller at comcast.net>; <s-car-list at audifans.com>
> Sent: Sunday, October 05, 2003 11:16 PM
> Subject: RE: [s-cars] Brake Upgrade Help Needed.
>
>
> > The "standard" 993 caliper looks very simliar to the "Big
> Black" caliper
> and
> > was used on other cars, such as (I believe) the 944 turbo
> (951)...but it
> is
> > designed for a 304mm diameter rotor, and not the 323mm
> rotor.  In fact, on
> the
> > original RS2, the rotors were 304mm, not 323...the change
> in rotor size
> was
> > accomodated solely by the use of the big red caliper, which
> sits a bit
> farther
> > off the same RS2 bracket; similarly, a 993 can be easily
> upgraded to 993tt
> Big
> > Reds by simply substitutin rotor and calipers.  Confirm
> your p/n with
> someone
> > who has done the Big Black approach (remember you have to
> reverse X-over
> pipe
> > and bleeder screws) as a substitute for the Big Red
> calipers.  (as I did
> Big
> > Reds, the p/n's I have won't help).
> >
> >
> >   _____
> > Linus Toy, linust at mindspring.com, Mercer Island, WA
> > For Sale:  '91 Audi 200q, IA ///+, big red brakes, H&R,
> Bilsteins, more :)
> > www.mindspring.com/~micarnut
> >   _____
> >
> >
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: s-car-list-admin at audifans.com
> > > [mailto:s-car-list-admin at audifans.com] On Behalf Of Tom Feller
> > > Sent: Sunday, October 05, 2003 10:39 PM
> > > To: s-car-list at audifans.com
> > > Subject: [s-cars] Brake Upgrade Help Needed.
> > >
> > >
> > > This is a multi-part message in MIME format.
> > > --
> > > [ Picked text/plain from multipart/alternative ]
> > > I have now started to install the brake upgrade on my 92 S4
> > > but somewhere I appear to have gone wrong. So I now need the
> > > list help. (Thanks to Gary Lewis and Linus Toy for getting me
> > > this far)
> > >
> > >
> > >
> > > I am running the A8L rotors, 4D0 615 301 A with RS2 brackets.
> > > I have a set of the "Big Black" calipers for a 928S4.
> > >
> > >
> > >
> > > The problem is that calipers hit the rotors before contacting
> > > with the RS2 brackets. I would say there is a 20 to 30 mm gap
> > > between the caliper and the RS2 brackets.
> > >
> > >
> > >
> > > So I either have the wrong calipers or the wrong rotors.
> > >
> > >
> > >
> > > Any ideas?
> > >
> > >
> > >
> > > Thanks!
> > >
> > >
> > >
> > > Tom Feller
> > >
> > >
> > >
> > >
> > >
> > > --
> > >
> > >
> > > _______________________________________________
> > > S-CAR-List mailing list
> > > S-CAR-List at audifans.com
> > > http://www.audifans.com/mailman/listinfo/s-> car-list
> > >
> >
> >
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>