[s-cars] 80tq: Dyno Update, 291whp 306ft/lbs

[Miikka Salonen]

> Hey come on it was an ego busting 13.9 seconds at
> 6psi....trying to cheat
> me out of those extra .2 seconds are ya ;)
> Congrats on the dyno run, those are some impressive numbers
> indeed! 300whp
> is just a cam change away I bet!
> Mike
>
> > Well, the tuning saga continues, read all about it below.
> >
> > http://www.80tq.com/Dyno0903.html
> >


Here is also nice dyno chart (411 hp / 486Nm ) from one guy in Finnish
Audi list :

http://www.kolumbus.fi/etelanlampo/dyno.htm

Car is old fwd Audi 100 that now has MC1 engine (10V turbo). Engine
management system is Hestec, injectors are Bosch 513cc at 4.5bar, custom
exhaust manifold (impulse manifold, turbo is Holset H1E 54/65 .

Pictures can be found from here:
http://www.kolumbus.fi/etelanlampo/projektit.htm

Unfortunately the texts are in Finnish, but you can watch the
pictures. There are also some videos on the page, but they are made
before tuning the car in the dyno. They managed to tune up boost and
fine tune the timings/fuel injection that it raised hp's from 330hp to
411hp! Boost presure is now 1.6 bar so there should be still some
margin left for stock "downstairs".

-Miikka-