[s-cars] Happersized Rear Sway Bars(HRSB)

[CaptMagu at aol.com]

s-heads

There has been a ground swell of interest and inquiry from this list as well 
as the AW group. I am therefore, opening up another run of the bars. For those 
of you with Avants and 92 S4s(some 93 Canadians as well) you have the stock 
17mm bar good for 33lbs of anti-roll. The HRSB has 3 adjustment holes and is 
good for 125, 140, and 155lbs of anti-roll. The bar comes with sized mounting 
brackets and urethane bushings and a set of beefy heim joints. For those of you 
with non-bar cars(the rest of us) there is a mounting kit available that 
allows the mounting of the bar with the provided brackets. 

There is a list of Audi-only pieces that are also required and they cost 
about $20. The weak link of these pieces is a key that allows the heim joint to be 
attached to chassis. Several listers have come up with solutions. Dave 
Dawson, who lives here in Evahboost is ready to offer his for $30. We're calling 
this the Merican fix. So if any of you that already have the bar would like this 
let me know. Here's what it all costs:

$420-HRSB w/mounting brackets and bushings and heim joints
$150-mounting kit(not required for Avants and 92 S4s)
$30-Merican fix
$20-shipping

I'm sure you've all heard the testimonials concerning this mod but I'll just 
say that this is the single most effective thing you can do for the turn-in 
and handling of a urS4/6 period. Please e-mail me off list for pics or 
questions. If you have a non-bar cars are planning this mod and funds are an issue, I 
would highly recommend that you buy just the mounting kit and the Mereican fix 
at this time since that piece is the hardest to come by.

Hap, with no sway in Evahboost, Maguire