[s-cars] Ignition Switch Part Number?

[Bill Mahoney]

Dave Forgied
"I think you can also get to the switch maybe easier from underneath
(taking off the knee panel that hides the central relay panel)."

Uh uh Dave;)  Set screws IME can only be gotten to from the topside as
they are covered in red loctite goop too that needs to be chipped away.
Yes there are allen type set screws in there and they need only be
loosened.
If you're careful, it can be done without disconnecting the IC wire
connectors.
It is the back half of the switch so no need to re key.
Tis really pretty easy.
http://tinyurl.com/5qdza
Cheer's
Bill m